Maytag Wringer Washer Power Unit Parts

It would be impractical to list shipping for each individual part. Therefore, shipping & handling is based on an average purchase of a few parts. We charge a minimum $14.50 flat base rate on all items, regardless of size. This covers the cost to process, pack, drop-ship, and ship.

Additional shipping may be required for larger orders. We will send you an invoice if additional shipping is needed. 

A4820 Larger oil seal for old transmission pulley shaft-worm gear 1-1/4" O.D. Seal (For 1-1/8" O.D. Seal use 15339, 99% will use this).

A4825 O-Ring for Shifter Cam, 95% of the time this is all that you will need, and reuse the washers

A4825-A Shifter Cam Seal Complete. Includes A4825 O-Ring, 1 x large flat, small flat, spring and cover (all used) washers  

(No Number) Aluminum Washer Shifter Cam Seal Retainer. (used in good condition) Not included in A4825-A Seal Kit.

A4907 Worm Wheel

A5374 Gasket for Wringer Head

K1283 Rack Gear

K1416 Slide for Rack

14758 Cork Thrust Bearing Gasket

14776 Worm Shaft, see below repair sleeve for pitted worm shaft

(BWS06 Sleeve available for pitted worm shaft repair at oil seal, includes pipe tool to insert)

14789 Shifter Spring (Not Pictured)

14842 Pinion Rack Gear

14855 Shaft for Rack

14843 Shifter Cam

14921 Silencer Button

14974 Shifter Rod (Not Pictured)

14975 Shifter Sleeve Pin (Not Pictured)

14976 Shifter Lever (Not Pictured)

15339 Pulley-Worm Shaft Seal (This is for 1-1/8" pulley shaft used on 99% of machines). For older 1-1/4" shaft, use A4820.

15339 Shaft Seal is an all-in-one equivalent to the A5042 kit and will replace 15685, 15409, 15341, 15409, 15339, and 15410. The new seal just presses in; no snap ring is needed.

55968 Lubricant: use locally obtained ISO 460 Gear Oil. Takes 16 oz. Difficult to ship. Contact us if needed.

The Amish depended on these old wringer washers, as most of the United States population did in the early 1900s, until newer modern spin cycle machines were developed. As manufacturing and replacement parts evolved, the Amish began having difficulty obtaining parts to maintain the wringer washers. So, they began manufacturing their own supply of replacement Maytag parts, as they still do today. Cottage Craft Works.com takes a step back in time to help people still using or restoring vintage home and farm equipment that needs replacement parts.

The washer parts listed are the most sought-after Maytag parts. Our Amish shop can procure or make almost any part used on round or square tub machines. Because the Amish convert most machines to gas, air, or DC-driven motors, they don’t manufacture new electric motors. They also don’t use a drain pump, allowing the washer to drain by gravity instead. If you should need an electric motor or water pump, we can find you a used take-off. Email us for availability of any parts we don’t list.

International customers, please email us the parts you need, and we will calculate shipping costs and send you a PayPal invoice in US Dollars. Duties and taxes will still be due to your country upon delivery.

Parts ship directly from an Amish-owned business without computers; please expect some orders to take up to two weeks to ship. Most parts are stocked but some may need to be made.

Click Here to see all the available Parts for Maytag Wringer Washing Machines.

Click Here to view our complete Maytag Wringer Washer service and repair manual.